Products Showroom - SCM-2 Series Centrifugal Pump

The SCM-2 series are with two back to back impellers, Because of two impeller to gain energy, it is an obvious choice that there is need for high head values but if hard to reach with single impeller centrifugal pumps. Suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers and loading extremely. These pumps should be installed in a covered area, protected against the weather.


	CPM Series Centrifugal Pump CPW Series Centrifugal Pump DK Series Centrifugal Pump DKm Series Centrifugal Pump SCM Series Centrifugal Pump SCM-2 Series Centrifugal Pump CM Series Centrifugal Pump DTM-20 Series Centrifugal Pump

	Pheripheral Pump Series Centrifugal Pump Series Automatic Pump Series JET Pump Series Self-Priming Pump Series

Technical Data

Type	Max.Capacity (L/min)	Max.head (M)	Power (w)	Pump dia (mm)	Net Weight (Kg)	Overall Dimension (mm)
SCm2-52	90	52	1100	12.5"X1"	22.4	415X255X320
SCm2-60	105	60	1500	12.5"X1"	25.5	415X255X320
SCm2-68	120	68	2200	1.5"X12.5"	35	480X290X350

The normal power standard is 220V and 50Hz single phase, pump speed of 2900r/min, but others below can be available up on request:
Three Phase;
Dual voltage: 110/220V/60Hz etc.
Single phase of 230V, 240V or 127V, 110V, 115V